There are three major steps required to assemble a suspension chain conveyor line: horizontal docking; reasonable tightening; commissioning operation.
The first is the welding and fastening of the fuselage. It is necessary to have a "four flat and eight stable" condition and the diamond shape should not appear at the four corners. Then, the rails, the fastening bolts and the tensioning are adjusted under the premise of confirming the level of the suspension chain conveyor line. Among them, adjusting the tension is a key step. Since the suspension chain conveyor line including the conveyor belt is a metal structure, the degree of tension should be mastered. If the conveyor belt is damaged, it may jump and derail.
The test procedure of the suspension chain conveyor line after the assembly is completed is also very important. It is necessary to adopt the point start and slow operation mode, and then operate normally after confirming the error.
Many small suspension chain conveyor lines are generally made by the whole machine in consideration of the installation cost and cost. When the customer adjusts himself, there is always such a small problem, and the error is not big, but he has to call to ask, delay time and waste energy. Therefore, the rigorous inspection process is the key link before the suspension chain conveyor line leaves the factory, and must not be ignored. Only when the inspection and assembly of the suspension chain conveyor line are completed, can the suspension chain conveyor line be made larger, transport better and go further.
Talking about the quality of the hanging chain conveyor line, manufacturers can now say that it is doing well, and the cruel competition and the enhancement of users' rights awareness also invisibly constrain the production enterprises. If it is said that the safety of the quality of the hanging chain conveyor line is safety and aesthetics, the future suspension chain conveyor line is preferably a fully enclosed stainless steel or carbon steel spray molding process, which is both beautiful and safe.
Then there is the after-sales aspect of the suspension chain conveyor line. This is indeed a place where the manufacturers of the suspension chain conveyor line urgently need to work hard. Do not form a product, leave it unchecked at the factory, and sometimes it is too lazy to deal with it. Not only has it delayed the use of customers, but it has also reduced its image, and at the end of its own, it has suffered losses. To be sure to answer questions, if you have any problems, you should deal with them and put the interests of the customers first.
- Introduction to the characteristics of the workshop belt line
- The role and layout of the suspension chain conveyor line
- Plate recycling line quality identification
- How to maintain the tray recycling line
- Roller line advantages and disadvantages
- Tooling plate line tensioner adjustment
- Tooling board line performance parameters
- Eight characteristics of double speed chain
- Hanging chain conveyor line safety precautions
- What is the role of the roller line?
- What should I pay attention to when using the roller line?
- Why dishwasher conveyor belts are so popular
- Dishwasher conveyors should pay attention to routine maintenance