Description of the double-row chain tray recycling line control system
The double-row chain recycling line is a very smart device. When people put the plate on one end of the device, it can transport the plate to the top of the garbage collection tank and pour out the food residue in the plate. Then the double-row chain recycling line can also send the plate to the recycling area. When the number of plates in the recycling area reaches a certain level, the device will remind the staff that these functions are derived from the control of the double-row chain recycling line. system design.
The double-row chain tray recycling line mainly uses PLC as the main control chip of the system. The control system mainly includes adsorption control, cleaning control, recovery control and speed pressure control. The double-row chain conveyor module and the tray recycling module are powered by a 220 volt power supply and the control system is powered by a 24 volt power supply. After the double-row chain tray recycling line adopts PLC control, it needs to input corresponding commands through the color LCD module, and the PLC drives the motor and the pressure regulating valve to set the cleaning and recovery speed and cleaning pressure of the whole system. PLC replaces relays, counters and other equipment with software functions, which greatly reduces the design, installation and wiring of the tray recycling line control. Through a series of anti-jamming measures of hardware and software, the average trouble-free time of the double-row chain recycling line can be more than tens of thousands of hours. The PLC not only has a low failure rate, but also has a self-diagnosis and display function. It can quickly find out the cause of the failure of the tray recycling line based on the information provided by the LED or the programmer on the PLC.
The control system of the double-row chain tray recycling line is relatively advanced, and it is more automated and intelligent than other recycling lines. When this smart tray recycling line is combined with a dishwasher or other cleaning equipment, the kitchen can be fully automated. This control system can be applied not only to the tray recycling line, but also to the industrial production site with strong interference, and to customize a production line with self-diagnosis function.
- Introduction to the characteristics of the workshop belt line
- The role and layout of the suspension chain conveyor line
- Plate recycling line quality identification
- Hanging chain conveyor line assembly steps
- How to maintain the tray recycling line
- Roller line advantages and disadvantages
- Tooling plate line tensioner adjustment
- Tooling board line performance parameters
- Eight characteristics of double speed chain
- Hanging chain conveyor line safety precautions
- Application of induction devices in dishwasher conveyor belts
- The application of PLC single chip in the tray recycling line
- The characteristics of the tray recycling line PLC
- The characteristics of the dishwasher conveyor belt
- How to make reasonable use of the tray recycling line
- How to design a tray recycling line
- Where is it suitable to install the tray recycling line?
- How to determine the beat of the tray recycling line
- Overview of Workshop Belt Pipeline Scheduling Problem
- How to choose a tray recycling line manufacturer