Roller bull's eye table combined production line
Easy to connect the filter assembly line between the roller conveyors. Multiple roller lines and other conveying equipment or special machines can be used to form a complex logistics conveying system to complete various process needs. Stacking and conveying of materials can be realized by using the stacking drum. The roller conveyor has a simple structure, high reliability, and convenient use and maintenance.
The roller line is suitable for conveying the goods at the bottom, and is mainly composed of a driving drum, a frame, a bracket, a driving part and the like. It has the characteristics of large conveying capacity, fast speed and light operation, and can realize multi-variety collinear split conveying.
Frame material: carbon steel spray, stainless steel, aluminum profiles.
Power mode: geared motor drive, electric drum drive and other forms.
Transmission mode: single sprocket, double sprocket, O-belt, flat friction transmission belt, timing belt, etc.
Speed control mode: frequency control, stepless speed change, etc.
Features of the equipment: It is easy to connect and filter between the roller conveyors. It can be composed of multiple roller lines and other conveying equipment or special planes to form a complex logistics conveying system and a diverting and confluence system to complete various process needs. Stacking and conveying of materials can be realized by using the stacking drum. The roller conveyor has simple structure, high reliability, convenient use and maintenance, and the power roller line considers the tensile strength of the chain, and the length of the long single wire generally does not exceed 10 meters.
Customized roller conveyors please call or please confirm the following technical parameters:
1. The length, width and height of the transported object;
2. The weight of each conveying unit;
3. The bottom condition of the conveyed object;
4. Whether there are requirements for special working environment (such as humidity, high temperature, chemical influence, etc.);
5. The conveyor is driven by no power or motor.
In order to ensure smooth delivery of the goods, the drum line must have at least three rollers in contact with the conveyor at any point in time. For soft bag packaging, trays should be added if necessary.
1. Selection of the length of the drum: The goods of different widths should be selected to fit the width of the drum. Under normal circumstances, the “conveying material + 50mm” is adopted.
2. The wall thickness and shaft diameter of the drum are selected: according to the weight of the conveyed object, it is evenly distributed to the contact roller, and the required load of each drum is calculated to determine the wall thickness and the shaft diameter of the drum.
3, roller material and surface treatment: According to the different transport environment, determine the material and surface treatment of the drum (carbon steel galvanized, stainless steel, black or rubber).
4. Installation method of roller line: According to the specific requirements of the whole conveyor, choose the installation method of the roller: spring press-in type, inner pin type, full flat type, through shaft pin hole type.
For the tapered roller of the cornering machine, the width and taper of the rolling surface depend on the size of the cargo and the turning radius.