Anti-static workbench

The anti-static workbench has anti-static function, not only because the desktop uses anti-static mats, but also a very important factor is the anti-static grounding wire. A workbench without an antistatic grounding wire can not function as an antistatic. The anti-static grounding wire is to discharge the static electricity generated by the entire anti-static workbench underground. How is the grounding wire connected? Let's take a look at it:

Use a stranded copper core cord or cable with a cross-sectional area of not less than 2mm2, and connect the anti-static mat and the ground pad to the grounding configuration system with a 1MΩ resistor in series, so that the anti-static workbench is grounded successfully.

The work board line work surface adopts anti-static fireproof board or anti-static mat, and the main frame adopts metal materials. Good grounding and excellent anti-static properties. The height of the workbench can be adjusted by adjusting the foot under the main frame. The cable configuration box can be reserved on the workbench and has several sets of multi-function power sockets, which is convenient for the lighting system. There is also a workbench that is made of stainless steel. The table top needs to be covered with an anti-static table mat. The table mat is connected to the ground through the contact line to achieve the effect of discharging static electricity.

The anti-static workbench of the tooling board line is mainly composed of anti-static table top, workbench bracket and accessories. The anti-static workbench is classified according to the composition. According to the performance of the classification, it can be roughly divided into two parts: a static-proof anti-static workbench and a dissipative anti-static workbench. The static-conductive anti-static workbench is mainly used in the clean room, because the static-conductive anti-static workbench is entirely composed of The metal structure is composed of dust that does not wear out during work and does not pollute the clean room. The dissipative anti-static workbench will pollute the clean room due to frequent wear and tear. The anti-static workbench is mainly used for the support. It is a supporting role. In addition, its metal bracket can be used on the anti-static floor, and the work surface is the focus of the anti-static workbench. The countertop mainly has physical and chemical properties such as impact resistance, corrosion resistance and stable performance. In order to maintain the components without being damaged or damaged by static electricity, test the anti-static workbench, and ensure that the measurement method is accurate. If the performance does not meet the specifications, you must remember to replace it in time to ensure the safety of the components.