According to the different structure of the elevator: scissor lift (fixed scissor lift, mobile lift), sleeve lift, aluminum alloy (column) lift, curved arm lift (folding arm type replacement), guide rail Chain elevators (elevator, freight elevator), steel cable hydraulic lifting device.
Classification: Scissor lifts are divided into mobile scissor lifts and fixed scissor lifts; among them, the mobile type is divided into traction type and self-propelled artificial traction type. There are three major categories of self-propelled.
Introduction: The main assembly line scissor lift is a versatile special equipment for aerial work. Its scissor-type mechanical structure makes the lifting platform have higher stability after lifting, the large working platform and high carrying capacity, which makes the working range of the aerial work larger and suitable for multiple people to work at the same time. It makes aerial work more efficient and safer. It is a versatile aerial work lifting device.
Features: The lifting mechanism is made of high-strength manganese steel 钜 tube. Safety protection against overloading the lift. A safety valve is provided to prevent the hydraulic line from rupturing. There is an emergency descent device in the event of a power outage. This product is suitable for mobile high-altitude operations such as installation and maintenance of high-altitude equipment in various industries. According to different requirements, different power forms (such as: three-phase AC power supply, single-phase AC power supply, DC power supply and internal combustion power) can be selected. With manual hydraulic device, it can be lifted and lowered as usual in power failure or no power supply, and can be expanded and contracted. The platform can be extended to the desired position when the length of the platform is insufficient, thereby improving work efficiency. It is an ideal equipped product for modern tall buildings and equipment, and is a must for safe and civilized production at high altitude.
Uses: Suitable for airport terminal buildings, aircraft repairs, stations, docks, shopping malls, stadiums, residential properties, factories and mines, and other large areas of high-altitude continuous operations. Some products have the function of automatic walking, which can travel quickly and slowly under different working conditions. Only one person can operate the machine in the air to complete the movements of up and down, forward, backward, and steering continuously. When the machine is at a standstill, the wheels are always in a braking state and can reliably brake at 6 degrees. Large-diameter extra-wide high-quality rubber wheels allow the user's ground to be effectively protected while increasing the friction of the brakes.
2. Set of cylinder
Brief introduction: The assembly line manufacturer's set of cylinder lifts is a multi-stage hydraulic cylinder upright, the hydraulic cylinder has high strength material and good mechanical performance, and the tower-shaped ladder-shaped cage makes the lifting platform have higher stability. Even at 20 meters, you can feel its superior smooth performance. It is mainly used for installation and maintenance of power lines, lighting appliances, elevated pipelines, and high-altitude operations such as high-altitude cleaning.
Features: New design, double ladder anti-rotation structure, two-speed descending system, rising up to 35 meters, stable, reliable, beautiful, easy to operate is a major feature of the set of cylinder electric lift. The multi-stage hydraulic cylinder is raised upright, the hydraulic cylinder has high strength material and good mechanical performance, and the tower-shaped ladder-shaped cage makes the elevator have higher stability. Even at an altitude of 20 meters, it is as smooth as a mountain. Power option: AC 220V (standard configuration), AC 380V power supply, DC power supply, manual pump.
Uses: Ordinary is also more practical, ascending homework may no longer be annoying. It is widely used in stations, factories, hotels, buildings, shopping malls, airports, stadiums, terminals, hotels, airports, and all kinds of occasions that need to be climbed.
3. Aluminum alloy
Introduction: The assembly line manufacturers are made of high-strength aluminum profiles. Due to the high strength of the profile, it has the advantages of beautiful shape, small size, light weight, compact structure, convenient movement, stable lifting platform, convenient operation, safety and reliability. It is more convenient and quick, can walk quickly and slowly, and can be adjusted. It is an ideal aerial work equipment for efficient and safe production in modern enterprises. The main products are divided into single column aluminum alloy, double column aluminum alloy, multi-column aluminum alloy lift.
Features: It adopts high-strength high-quality aluminum alloy material, which has the advantages of beautiful appearance, small size, light weight, stable lifting, safe and reliable. Its light appearance gives it a high lift capacity in a very small space. The column lifting system has the characteristics of large load capacity, strong stability, large platform area and convenient implementation.
Single-column aluminum alloy lift: This series of products is indoor type, widely used in high-altitude operations in halls and workshops of star-rated hotels, large supermarkets, etc. It has lifting balance, easy operation, can enter the general entrance hall, and can enter and exit the elevator at will. It consumes less power, has no pollution, and does not hurt the ground during work. It can be used for wall work and exploration work, and there is no dead angle in the work. The single-column aluminum alloy electric lift is equipped with the gantry cross-frame attachment, which is very suitable for the maintenance work of theaters, halls, churches, etc. The gantry cross-frame is easy to assemble, labor-saving and flexible, and can span obstacles such as fixed seats with a height of 1.1 m, and can be stably operated on the steps. Made of high-strength rectangular steel tube with good rigidity and stability. With universal casters, it is flexible and flexible. The span of the two ends is adjustable and can be adapted to meet the requirements of different obstacles. The two ends of the frame are vertically adjustable and can be used on slopes or steps with a certain slope.
Double-column aluminum alloy lift: a new generation of newly designed products, which are made of high-strength aluminum profiles. Due to the high strength of the profile, the deflection and swing of the lifting platform is extremely small. It adopts double-column structure, large load capacity, large platform area, excellent stability, flexible operation and convenient implementation. Its light appearance gives it a high lift capacity in a very small space. The lift is widely used in factories, hotels, buildings, shopping malls, stations, airports, stadiums, etc. It can be used for high-altitude operations such as installation and maintenance of power lines, lighting appliances, and elevated pipelines, and single-person work such as high-altitude cleaning.
Column aluminum alloy lift: three sets of mast support work platform synchronous lifting, the structure of the support and the single-column platform, with large load capacity and excellent working stability. The overall lifting guardrail device has good strength and greatly reduces the height of the whole machine during transportation. It is very convenient to load and unload, and can be assembled or disassembled by one lifting and lowering. The lift has strong carrying capacity and is suitable for two people (can carry certain weight tools and materials) to climb the work at the same time; it can also be made into various non-standard products according to different environments to meet different needs.
Column aluminum alloy lift: The whole is made of high-strength aluminum profile. Due to the high strength of the profile, the four-column structure is adopted, the stability is excellent, the operation is flexible, the load is large, the platform area is large, and the implementation is convenient. Its light appearance gives it a high lift capacity in a very small space. The deflection and swing of the lifting platform are extremely small.
Auxiliary walking double mast lift: It can be used in different working conditions without external power supply, flexible movement, convenient operation and freely liftable. Only one person can complete forward, backward, steering, fast, slow walking and up and down movements. Labor saving and labor saving. It is especially suitable for a wide range of aerial work such as stations, docks, airports, stadiums, and large enterprises. It is an ideal aerial work equipment in China. This series of products is a double mast lifting system with strong stability.
4. Curved arm
Introduction: The crank-arm lift is a new generation of folding arm lifts. Can be overhanging, crossing certain obstacles or lifting in one place for multi-point operation; 36 degrees rotation, platform load is large, can be used for two or more people at the same time and can carry certain equipment; lifting platform mobility Well, the transfer site is convenient; the appearance is beautiful, suitable for a wide range of operations such as stations, docks, shopping malls, stadiums, residential properties, factories and mines.
Features: High-quality structural steel, single-sided welding double-sided forming process, original imported hydraulic pump station or domestic joint venture hydraulic pump station, high-altitude lifting platform with balance valve, automatic pressure-keeping and other safety devices, the platform is safe, reliable and durable. This series of lifts has the characteristics of flexible movement, stable lifting, large load capacity and convenient operation.
Uses: The curved arm type aerial work platform can be divided into two types: straight arm and curved arm according to the arm extension mode. It is mostly used in places with high requirements such as shipyards. Such machines are safe and easy to move, but the cost is high. Widely used in factories, automatic warehouses, parking lots, municipalities, stations, airports, theaters, exhibition halls, terminals, construction, decoration, logistics, electricity, transportation, petroleum, chemical, hotels, stadiums, industrial and mining, enterprises, etc. service. It is a good choice for maintenance tools, paint decoration, replacement lamps, electrical appliances, cleaning and maintenance. It can be designed and manufactured according to the requirements of individual needs. This type of lift is commonly used by fire brigades.